25
Chapter 3: Using the remote control
Learning about the remote control
The buttons used for operating the TV/DVD are
described here. For the REGZA-LINK® remote
control functions, see the section “Using REGZA-
LINK®” ( Page 47).
Note: The error message “NOT AVAILABLE”
may appear if you press a key for a function
that is not available.
1POWER turns the TV on and off. When the
TV is on, the Power LED indicator on the TV
front will be illuminated in green.
2SLEEP accesses the sleep timer ( Page
47).
3EJECT ejects the disc from the disc slot.
4TV/DVD switches to TV or DVD mode.
5Channel Numbers directly tune channels.
6JUMP selects or locates a specific point with
the disc playback ( Page 59); tunes to a
digital sub-channel as a “dash”.
7DISPLAY displays setting or playback
information ( Page 49, 63).
8AUDIO SELECT selects the DVD
soundtrack language or VCD audio channel
( Page 63).
9VOL + – adjusts the volume level.
10 CH cycles through programmed
channels when no menu is on-screen (
Page 34).
11 SUBTITLE selects the subtitle language or
switches subtitle off ( Page 63).
12 INPUT/ZOOM selects the video input source
( Page 33); zooms into the center of the
image during disc playback ( Page 59).
13 PLAY MODE sets the disc playback repeat
mode ( Page 60).
14 MUTE reduces or turns off the sound (
Page 40).
15 DVD MENU accesses the DVD menu (
Page 62).
16 ENTER activates highlighted items in the
main menu system.
17 Arrow buttons ( ) select or
adjust programming menus when a menu is
on-screen.
18 EXIT/CANCEL closes on-screen menus.
19 MENU/SETUP accesses the main TV menu
system ( Page 27); configures the disc
playback settings ( Page 70).
20 PLAY begins playback of the loaded disc (
Page 56).
21 PAUSE suspends disc playback temporarily
or plays back disc frame by frame ( Page
56, 57).
22 STOP stops playback of the loaded disc (
Page 56).