57

Chapter 8: Basic disc playback

Removing a disc

Disc playback reminders

•If the TV/DVD does not operate properly, static
electricity build-up may be the cause. Turn off the
TV/DVD, then disconnect the power cord from
the AC outlet. Reconnect the power cord, then
press POWER to turn on the TV/DVD
again.
•If an incompatible disc is loaded, one of the
following error messages appears on-screen:
“Incorrect Disc”, “Disc region incorrect” or
“Enter Password”. If this is the case, check your
disc again. Go to Page 8 for a list of supported
disc formats, and to Page 76 for playback-related
troubleshooting instructions.
•In some instances the TV/DVD may take a
minute or so to start disc playback.
•When you load a disc with the playback side
facing backward, “Reading” appears on-screen
but it will be replaced by “Incorrect Disc”. Eject
the disc and load it again making sure the
playback side is now facing forward.
•The playback resume function may not work on
some discs.
•Some DVDs may have fixed playback operations
designed by the DVD manufacturer. Your TV/
DVD follows this fixed playback design. In such
cases, some playback features may not be
available. You may refer to the instructions
accompanying the DVD.
•Do not put any objects other than compatible
discs on the disc slot. Doing so may cause damage
to the TV/DVD.
•There may be a few seconds between the action of
pressing a button and the function it activates.
Playback navigation

Playing in fast reverse or fast

forward direction (DVD/VCD/CD)

To resume normal playback:
Press .
Note:
•The sound is muted during reverse and
forward scan.
•The playback speed may differ depending
on the disc.
•You can use fast reverse/fast forward
playback for MP3, and WMA CDs.

Playing frame by frame (DVD/VCD)

To resume normal playback:
Press .
Note:
•The sound is muted during frame by frame
playback.

Playing in slow motion (DVD/VCD)

To resume normal playback:
Press .
Note:
•The sound is muted during slow motion
playback.
1Press EJECT on the TV control panel or
on the remote control.
2Wait for the disc to be ejected and then remove
the disc from the slot. 1Press REV or FF during playback.
REV : Fast reverse playback
FF : Fast forward playback
Each time you press REV or FF , the
playback speed changes.
1Press during playback.
Each time you press , the picture advances
one frame.
1Press SLOW or SLOW during
playback.
SLOW : Slow reverse playback
SLOW : Slow forward playback
Each time you press SLOW or SLOW ,
the slow motion speed changes.