Chapter 6: Using the TV’s features

Input labeling example:

The screen below is an example of how you could label the inputs if you connected a VCR to Video,

aVideo Recorder to HDMI 1, and a DTV set-top box to HDMI 2. Also note that the ColorStream HD input is labeled “Hidden”, which means that input will be skipped over when is pressed.

To clear the input labels:

1From the Preferences menu, press or to select Input Labeling and then press .

2Highlight Reset and then press .

Tuning channels

Setting the Channel Tuning Mode

This feature allows you to choose how tuning will be handled for analog and digital channels when the TV is in Antenna mode.

Note: To use this feature, the Input Configuration must be set to Antenna ( Page 28).

The channel tuning mode has three options.

Mode Description

Standard

Both analog and digital channels can

be tuned normally.

 

 

Digital channels will have priority

 

when manually entering a channel

Auto

number using the Channel Number

(Default)

buttons (0-9) on the remote control,

 

analog channels can still be tuned by

 

or , if available.

Digital

Only digital channels can be tuned.

1From the Setup menu, press or to select Installation and then press .

2Press or to highlight Terrestrial, and then press or to select Channel Tuning Mode.

3Press or to select your desired mode.

Note: Even if the Channel Tuning Mode is set to Digital, analog channel 3 will still be the default channel to prevent the initial case where no digital channels have been found in prior channel scans.

Tuning to the next programmed channel

To tune to the next programmed channel:

Press or on the remote control or PLAY/ CHANNEL or STOP/CHANNEL on the TV control panel.

Note: This feature will not work unless you program channels into the TV’s channel memory ( Page 29).

34

Page 34
Image 34
Toshiba 15CV100U, 32CV100U manual Tuning channels, Setting the Channel Tuning Mode, Tuning to the next programmed channel