28
Chapter 5: Setting up your TV

Initial Setup

When you first turn on or reset the TV, the Initial
Setup window will appear.

Selecting the menu language

You can choose from three different languages
(English, French and Spanish) for the on-screen
display of menus and messages.

Configuring the antenna input

source for the ANT/CABLE terminal

1In the Menu Language field, press or
to select your preferred language.
2Press or to select Time Zone Setup
and set your desired time zone with or
and then press .
3Next, the location setting window will appear.
For normal home use, press or to select
Home and then press .
4Next, ANT/CABLE In setup window will
appear. Press or to select the input source
(Cable or Antenna) for the ANT/CABLE
input on the TV.
5If you select Antenna, the Channel Tuning
Mode setup window will appear. To tune only
digital channels, select Digital. To tune digital
channels preferentially over analog when
entering channel number directly, select Auto.
For normal tuning, select Standard. Press
to continue to Auto Tuning.
6Press to select Start Scan and continue
with the Auto Tuning.
1Press to open the menu.
2Press or to highlight Preferences
menu.
3Press or to select Menu Language.
4Press or to select your preferred menu
language.
1From the Setup menu, press or to
select Installation and then press .
2Press or to highlight Terrestrial, and
then press or to select Input
Configuration and then press .
3Press or to highlight ANT/CABLE In
and then press or to select the input
source (Cable or Antenna) for the input on
the TV.
4To save your new settings, highlight Done
and then press . To revert to your original
settings, highlight Cancel and then press .