Toshiba 37HL86, 32HL86, 26HL86 manual Using the remote control to operate your other devices, CH Bb

Chapter 3: Using the remote control

Using the remote control to operate your other devices

If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so) (- pages 21–23).

To use your TV remote control to operate a:

•Cable converter box or satellite receiver, set the MODE SELECT Switch to CABLE/SAT.

•DVD player or HTIB, set the MODE SELECT Switch to

DVD.

•VCR, set the MODE SELECT Switch to VCR.

Note: Even after the TV remote control is programmed, it may not operate certain features on your other device. If this happens and you wish to use those features, you will need to use the device’s original remote control.

Point the remote control directly at the device.

1POWER Turns the selected device on and off.

2Channel Numbers (0-9)Press to directly access channels (as opposed to <,).

3+10 Press to directly access DVD chapters higher than 10.

4CH Bb

B selects the next higher channel;

b selects the next lower channel (for channels programmed into memory only).

5INFO Displays TV status information on-screen.

6BbC c Press to navigate DVD menus (may not work on some DVD players).

7ENTER Required by some satellite receivers and DVD players.

8DVD CLEAR Press to reset the title and chapter number.

9PLAY Begins playback of a tape or DVD.

10PAUSE Press during play or record mode to pause the picture; press again to restart.

11STOP Stops the tape or DVD.

12SKIP z Skips forward to locate later DVD chapters.

13FF Fast-forwards the tape or DVD. (Press during play mode to view the picture moving rapidly forward.)

14SKIP ZSkips back to beginning of current DVD chapter or locates previous chapters.

15REW Rewinds/reverses the tape or DVD. (Press during play mode to view the picture moving rapidly backward.)

16TV/VCR To view one program while recording another, press to select TV mode.

17REC Starts tape recording.

18TOP MENU Accesses a DVD’s top menu.

19SET UP Accesses a DVD’s setup menu.

20MODE SELECT Switch Set to “TV” to control the TV; “CABLE/SAT” to control a cable converter box or satellite receiver; “DVD” to control a DVD player or HTIB; “VCR” to control a VCR.

19