Chapter 1: Introduction

TV back panel connections

For an explanation of cable types and connections, see Chapter 2 (- page 10).

TV back

1

34

2

Power cord

Cable Clamper

5

6

7

1A/V OUT — Standard composite video and analog audio outputs for connecting a VCR for editing and dubbing.

2ColorStream® HD-1 and ColorStream® HD-2

Two sets of ColorStream® high-definition component video inputs (with standard analog audio inputs) for connecting devices with component video output, such as a Toshiba DVD player with ColorStream®.

Note: Component video cables carry only video information; separate audio cables are required for a complete connection.

3PC/HDMI (AUDIO) IN — One set of shared analog audio inputs (shared between the PC IN and HDMI IN

terminals). Their use can be configured in the Set Up menu (- page 42).

4VIDEO-1 IN — Standard (composite) video and standard (analog) audio inputs for connecting devices with composite video output.

Note: VIDEO-1input terminals are shared with ColorStream HD-1input terminals. When component video cables are connected to the ColorStream HD-1terminals and ColorStream HD-1is the current input mode, the VIDEO-1input terminals will not carry any signals.

5ANT — Antenna input that supports analog (NTSC) antenna signals and analog cable TV signals.

6PC IN — For use when connecting a personal computer (- page 16).

7HDMIIN High-Definition Multimedia Interface input receives digital audio and uncompressed digital

video from an HDMI device, or uncompressed digital video from a DVI device (- item 3, at left; also - page 15).

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

9

Page 9
Image 9
Toshiba 32HL86, 37HL86, 26HL86 manual TV back panel connections, For an explanation of cable types and connections, see