Adjusting the Picture Position

Press Yand open the Set Up menu.

Chapter 6: Using the TV’s features

2 Press B or b to highlight Picture Position, and then press T.

3 Press B or b to highlight the item you want to adjust.

Picture Position

MENU Back EXIT Watch TV

4 Press C or c to adjust the settings as required.

	Horizontal Position		-2
	–			+
The display will return to the previous menu after 4
seconds if no button is pressed.

Selection		Pressing C		Pressing c

Horizontal	Moves picture left		Moves picture right
Position	Moves picture left		Moves picture right
Position

Vertical	Moves picture down		Moves picture up
Position	Moves picture down		Moves picture up
Position

To reset to the factory-set status:

Follow steps 1-3 above, select Reset in step 3, and then press T.

Note: You can adjust the Horizontal Position and Vertical Position in TheaterWide 2 and TheaterWide 3 modes only.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the picture size is automatically selected when one of the following input sources is received:

•A 480i signal from the VIDEO-1, VIDEO-2,

ColorStream HD-1, or ColorStream HD-2 input.

•A 1080i, 480i, 480p, or 720p signal from the HDMI input.

	Aspect ratio	Automatic aspect size
	of signal	(automatically selected when
	source	Auto Aspect is On)

	4:3 normal	Natural (with sidebars)

	4:3 letter box	TheaterWide 2

	16:9 full	Full

	Not defined
	(no ID-1 data	Selecting the picture size (- page 31)
	or HDMI	Selecting the picture size (- page 31)
	or HDMI
	aspect data)

Note: The auto aspect ratio feature is not applicable to antenna or cable input sources.

1 Press Yand open the Function menu. 2 Press B or b to highlight Auto Aspect.

3 Press C or c to select On.

To turn off the auto aspect ratio feature:

Select Off in step 3 above.