Toshiba 46UX600U, 40UX600U Connecting a personal computer PC, Before using the PC, To use a PC

Chapter 2: Connecting your TV

Connecting a personal computer (PC)

With either the PC IN or HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers.

To connect a PC to the PC IN terminal on the TV, you will need:

•Analog RGB (15-pin) computer cable •PC audio cable

TV back panel

	PC audio	Analog
PC	cable
		RGB
		computer
		cable
	PC audio
	output

Conversion adapter (if necessary)

Before using the PC:

See “Using the PC settings feature” (- page 50).

To use a PC:

•Set the monitor output resolution on the PC before connecting it to the TV.

•Supported signal formats: VGA, SVGA, XGA, WXGA, SXGA. For detailed signal specifications, see page 88.

Note:

•The PC audio input terminals on the TV are shared with the HDMI 2 analog audio input terminals.

•Some PC models cannot be connected to this TV.

•An adapter is not needed for computers with a compatible mini D-sub15-pin terminal.

•Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.

Signal names for mini D-sub 15-pin connector

Pin	Signal	Pin	Signal	Pin	Signal
No.	name	No.	name	No.	name
1	R	6	Ground	11	NC
2	G	7	Ground	12	NC
3	B	8	Ground	13	H-sync
4	NC *	9	NC	14	V-sync
5	NC	10	Ground	15	NC

*NC=Not connected

To connect a PC to the HDMI terminal on the TV, you will need:

If your PC has no HDMI terminal: •Adapter cable

•Analog audio cable

If your PC has HDMI or DVI terminal: •HDMI cable or HDMI-to-DVI adapter cable

TV upper back panel

	PC audio
PC	cable	HDMI-to-
		DVI
		adapter
		cable
	PC audio
	output

Supported signal formats: VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), 1080p (24Hz/60Hz). For detailed signal specifications, see page 89.

Note: The edges of the images may be hidden.

20