Toshiba 46UX600U, 40UX600U, 55UX600U manual Expert Mode, ClearFrame feature

Models: 55UX600U 40UX600U 46UX600U

1 107
Download 107 pages 24.52 Kb
Page 59
Image 59

Chapter 7: Picture and sound controls

Expert Mode

This feature individually enables/disables the Red, Green, and Blue components of the picture to allow for more accurate adjustment of each color.

1From the PICTURE menu, highlight Advanced Picture Settings and press OK .

2Press B or b to select Expert Mode, and then press

OK .

3Press B or b to select either Red, Green or Blue.

4 Press C or c to select On.

5Press b to select Color or Tint, press C or c to adjust, and then press EXIT .

Note:

When the Picture Mode is set to AutoView, this feature will be grayed out.

When the Expert Mode menu is exited, the On/Off modes of Red, Green and Blue are no longer valid.

It is not possible to turn off all three colors at the same time.

ClearFramefeature

The ClearFrame 120 Hz anti-blur technology doubles the frame rate from 60 frames per second to 120 frames per second, virtually eliminating motion blur without adding flicker or reducing image brightness.

1From the PICTURE menu, highlight Advanced Picture Settings and press OK .

2Press B or b to select ClearFrame.

3Press C or c to select On, and then press EXIT .

Note: If the Picture Mode is set to Game, this feature will be grayed out.

MPEG NR

The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression.

1From the PICTURE menu, highlight Advanced Picture Settings and press OK .

2Press B or b to select Noise Reduction and press

OK .

3Press B or b to highlight MPEG NR.

4Press C or c to select either Low, Middle, High or Off and press OK .

Note: If the Picture Mode is set to Game or PC, this feature will be grayed out.

DNR

DNR enables you to “soften” the screen representation of a weak signal to reduce the noise effect.

1From the PICTURE menu, highlight Advanced Picture Settings and press OK .

2Press B or b to select Noise Reduction and press

OK .

3Press B or b to select DNR.

4Press C or c to select Low, Middle, High, Auto or Off and press OK .

Note:

If the Picture Mode is set to Game or PC, this feature will be grayed out.

The differences may not always be noticeable (for the best result use lower settings as picture quality can be lost if the setting is too high).

59

Page 59
Image 59
Toshiba 46UX600U, 40UX600U, 55UX600U manual Expert Mode, ClearFrame feature