62 G8000 Series Installation and Operation Manual

14.1 Operation Types

The operation types are summarized below.
TABLE 14.1 OPERATION TYPES

Operation Description

Complete Shutdown Turn off the control power supply. Shut down the UPS
completely.
Float / Equalize Charge Changing the battery recharge mode between oat charge and
equalize charge.
Protection Charge Automatic recharge mode transition from protection charge to
oat charge.
Startup Starting up and operating the UPS.
Stop Stop the inverter and chopper/charger.
Switch Power Supply Switching power supply source between UPS and Bypass.

14.2 Pre-operational Check

Before operating the UPS:
1. Make sure all covers/panels are in place and secured.
2. Make sure the temperature in the UPS/Battery room is within specied limits.
3. Before starting the UPS, check the power source to make sure AC input power is on.
4. Make sure battery breaker’s auxiliary A-contact is connected to the terminal block TB1.
CAUTION
Perform the pre-operational check before operating the UPS.