Chapter 3: Using the remote control

Installing the remote control batteries

To install the remote control batteries:1. Slide the battery cover off the back of the remote control.

2.Install two “AA” size alkaline batteries. Match the + and – symbols on the batteries to the symbols on the battery compartment.

Caution:

•Dispose of batteries in a designated disposal area. Do not throw batteries into a fire.

•Do not mix battery types or combine used batteries with new ones.

•If the remote control does not operate correctly, or if the operating range becomes reduced, replace both batteries with new ones.

•If the batteries are dead or if you will not use the remote control for a long time, remove the batteries to prevent battery acid from leaking into the battery compartment.

3. Slide the battery cover on to the remote control until the lock snaps.

Using the remote control MODE button to control other devices

Your TV remote control has one dedicated TV mode and five programmable multi-brand modes: CABLE/SAT, VCR, DVD, AUDIO 1, and AUDIO 2. The default device modes and programmable device modes are listed below.

Note: The TV remote control is preprogrammed to operate most Toshiba devices. If you own a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you will need to program the remote control. See “Programming the remote control to operate your other devices” on page 30.

MODE

Default device mode control (before programming)

TV

Toshiba TV

CABLE/SATToshiba Satellite receiver

VCR

Toshiba VCR

DVD

Toshiba DVD

AUDIO 1

Pioneer Audio receiver

AUDIO 2

Pioneer LD

MODE

Device mode control after programming

TV

Toshiba TV

CABLE/SAT

Multi-brand Cable, Satellite

VCR

Multi-brand VCR, DVD, LD, Cassette

DVD

Multi-brand DVD, VCR, LD, Cassette

AUDIO 1

Multi-brand Audio: Amp., Tuner, Misc.Audio, CD/MD

AUDIO 2

Multi-brand Audio: CD/MD, Amp., Tuner, Misc. Audio

MODE

 

+10

 

–

ACTION

100

MENU

THEATER

 

NET

FAV

ENTER

+

PAG

E

–

Note:

Although your new TV’s remote control includes codes for many devices, it may not include codes for some or all of the features on certain devices you wish to control. If you are unable to program the TV’s remote control to operate your device or some of the features on that device, use the device’s remote control or the controls on the device.

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.

27