Toshiba 51H93, 57H93, 65H93 Using the StableSound® feature, Resetting your audio adjustments, Using the SRS WOW™ surround sound feature, ENTER, center (0), center (50), center (50)

Chapter 8: Using the TV’s features

Adjusting the audio (continued)

Using the StableSound® feature

The StableSound® feature limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial).

To turn on the StableSound® feature:

1.Press MENU and open the AUDIO menu.

2.Highlight AUDIO SETTINGS and press ENTER.

3.Press z to highlight STABLE SOUND, and then press • to select ON.

	Audio Settings
	Bass		50
	Treble		50
Audio
	Balance		0
Audio Settings
	SBS
Advanced Audio Settings			50	On
	SBS Level
Audio Setup
	StableSound
				On
		Save	Done		Reset

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

To turn off the StableSound feature:

Select OFF in step 3 above.

Resetting your audio adjustments

The RESET function returns your audio adjustments to the following factory settings:

Bass .............	center (50)	SBS................	ON
Treble ..........	center (50)	SBS Level ......	70
Balance ........	center (0)	StableSound ...	OFF

To reset your audio adjustments:

1.Press MENU and open the AUDIO menu.

2.Highlight AUDIO SETTINGS and press ENTER.

3.Press z to highlight RESET and press ENTER.

Audio Settings

Bass	50
Treble	50
Balance	0
SBS
		On
SBS Level	70
StableSound
		Off
Save	Done		Reset

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

Using the SRS WOW™ surround sound feature

WOW is a special combination of SRS Labs audio technologies (SRS 3D, FOCUS, and TruBass) that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider.

To adjust the WOW settings:1.Put the TV in STEREO mode (see “Selecting stereo/SAP broadcasts” on page 76).2.Press MENU and open the AUDIO menu.3.Highlight ADVANCED AUDIO SETTINGS and press

ENTER.

	Advanced Audio Settings
	SRS WOW: 3D
				On
	SRS WOW: Focus
Audio				On
Audio Settings	SRS WOW TruBass			High
Advanced Audio Settings		Save	Done	Reset
Audio Setup

4.Press z or y to highlight the WOW feature you want to adjust, and then press x or • to adjust the item.

•3D — To turn the surround sound effect on or off.

Note: If the broadcast is monaural, the 3D effect does not work.

•Focus — To turn the vocal emphasis effect on or off.•TruBass — To select the desired bass expansion level (HIGH, LOW, or OFF).

5.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

To reset the WOW settings:Highlight RESET in the Advanced Audio Settings menu and press ENTER.

Advanced Audio Settings

SRS WOW: 3D		Off
SRS WOW: Focus
		Off
SRS WOW TruBass
		Off
Save	Done	Reset

________

SRS, WOW and the symbol are trademarks of SRS Labs, Inc. SRS WOW technology is incorporated under license from SRS Labs, Inc.

78 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.