For an overview of steps for
installing, setting up, and using
your new TV, see page
Dear Customer
NOTE TO CATV INSTALLERS IN THE USA
ON TV PICTURE TUBE
Installation
Care
Service
Important Safety Precautions for Split Cabinet Feature
Page
To get started, see
“Overview of steps for
and using your new TV”
on page
Page
2POWER — Press to turn the TV on and off
7EXIT — Press to close an on-screenmenu instantly
9 !º !¡ !™
21 and
S-video
cable
Component video cables
Optical audio cable
Note regarding picture quality
You will need:
two coaxial cables
To view the antenna or Cable signal: Turn off the VCR
Select the ANT 1 video input source
To view the VCR:
one Cable signal splitter
five coaxial cables
one set of standard A/V cables
To view basic Cable channels and use the TV’s features:
To view basic and premium Cable channels:
three coaxial cables
two sets of standard A/V cables
To view satellite programs using the component video connections:
Select the ColorStream HD-1video input source on the TV
To view the VCR or view and record antenna channels:
five coaxial cables
one set of standard A/V cables
one S-videocable
one pair of standard audio cables
To view premium Cable channels:
two sets of standard A/V cables
one pair of standard audio cables
one set of component video cables
To view antenna or Cable channels:
source on the TV
two coaxial cables
To view the antenna or Cable signal:
To view VCR 1:
VCR 2 must select “line IN.”
VCR
one DVI-Ddigital single-linkcable
To view the camcorder video:
Select the VIDEO 3 video input source
one optical audio cable
To control the audio:
Turn on the TV and the digital audio device
Press MENU on the TV’s remote control and open the AUDIO menu
Highlight AUDIO SETUP and press ENTER
one single audio cable for the audio center channel
Dolby Pro Logic surround sound
system connection example
TheaterNet™ on-screendevice control
Using analog-compatible IEEE-1394devices
Supported signals
Using TheaterNet™ on-screendevice control
IEEE-1394device initialization
IEEE-1394device management
IEEE-1394device interconnection
If you have a Cable box, you need to connect the
If you have a VCR, you need to connect the
To connect to the G-LINKjack:
3.Plug the G-LINK(IR blaster) cable’s plug into the TV’s G-LINKjack
See page
POWER turns the TV on and off
SLEEP accesses the sleep timer (page 82)
Channel Numbers (0–9,100) directly access channels (page 42)
THEATER NET accesses the on-screenIR device control icons (page 46)
MENU accesses the menu system (page 35)
To install the remote control batteries:
1. Slide the battery cover off the back of the remote control
3. Slide the battery cover on to the remote control until the lock snaps
CABLE/SAT
Toshiba Satellite receiver
Page
Page
Device code setup
Refer to the
4.Point the remote control at the device and press POWER to test the code
If the device does not respond to the remote control:
You may have entered the wrong code. Repeat steps 3 and 4 using another code
Using the volume lock feature (8000)
1.Repeatedly press MODE to select CABLE/SAT mode
3.Press VOL y
The CABLE/SAT mode light will blink two times (locked)
To reset the volume controls to the original device mode:
Page
Page
Page
•Press MENU to open the menu system
•To close a menu instantly, press EXIT
Choosing your preferred language (English, French, or Spanish) for
Choosing your preferred picture mode (See page 72 for details on this feature.)
Manually starting the Quick Connect Guide assisted setup
3.Open the QUICK CONNECT menu, highlight START, and then press ENTER
If you already set up the TV Guide On Screen system, go to page
1.The following screen opens. Press ENTER to continue
2. The following screen opens. Press ENTER to continue
3. The following screen opens. Press ENTER to continue
Configuring the location of your TV
1. Select the TV location (USA or Canada)
For G-LINKconnection details, see page
5. Highlight your Cable box brand, and then press ENTER
Cable box code testing
same code again, select TEST THIS CODE AGAIN and press ENTER
Go to step
3.Select your VCR brand, and then press ENTER. Code testing begins
VCR code testing
Confirming your settings
TV Guide On Screen program guide setup process
2. If you selected YES in step 1, the following screens appear
Important final setup steps
1.Turn OFF your TV overnight. (Do not unplug the power cord.)
2.If you have a Cable box connected, leave it ON
3.If you have a VCR connected, turn it OFF. (Do not unplug the power cord.)
To select the menu language:
1.Press MENU and open the PREFERENCES menu
2.Highlight MENU LANGUAGE and press ENTER
3.Highlight your preferred menu language in the menu sidebar and press ENTER
4. Press EXIT to close the PREFERENCES menu
Programming channels automatically
Manually adding and deleting channels in the channel memory
Programming your favorite channels
To add and delete channels in the Favorite Channels lists:
2.Highlight FAVORITE CHANNELS and press ENTER
6.When done, highlight SAVE and press ENTER
To clear your favorite channel lists:
Setting up TheaterNet
To set up TheaterNet device control:
4.Open the DEVICES menu, highlight THEATER NET DEVICES, and then press ENTER
The TheaterNet Setup menu opens
5.Using the x • buttons, select the INPUT the device is connected to
Using the TheaterNet control icons
Highlight the icon for the function you want to control and press ENTER
To close the on-screencontrol icons:
Press EXIT
To view another source:
TheaterNet IR device codes
TheaterNet IR device codes (continued)
Page
Manually adjusting the color
convergence
To check and adjust the color convergence manually:
1. Press MENU and open the SETUP menu
can see clear images on your TV screen, skip this procedure
10.Press EXIT once to select another area to adjust, and then repeat steps 7–9
To set the time and date:
To view the digital signal meter:
3.Open the TERRESTRIAL menu, highlight SIGNAL METER, and press ENTER
Highlight OK and press ENTER
To return to normal viewing:
To check the system status:
The TV Guide On Screen system includes the following features:
•Schedule—Viewa list of programs you set as favorites or scheduled to record
One-touch
recording
•Favorites—Createa list of your favorite programs for easy browsing and tuning
•Menu Bar (LISTINGS, SORT, PROMOTIONS, SETUP, MESSAGES, and SCHEDULE)
•Video Window with lock icon
•Program and/or channel listings
•Panel ads
•Blue and Green ACTION buttons
To open the TV Guide On Screen system:
Using the remote control: Press GUIDE
Press GUIDE
To select a menu in the Menu Bar:
Press MENU or use the up/down arrow buttons (yz) to select the
Viewing program listings and descriptions
INFO windows
Direct tuning
Video Window
Setting programs as favorites
One-touchand VCR Plus+ recording
Viewing panel ads and channel ads
Using the Menu Bar to access other menus
Change system settings
Change channel display
Review options
The PROMOTIONS menu displays a list of the promotions
that appear in the panel ad window, along with TV Guide On
Screen features and tips
To open the PROMOTIONS menu:
3.Use the x • buttons to select the PROMOTIONS menu
To select the video input source to view:
1.Press INPUT on the remote control or TV/VIDEO on the TV front panel
The current signal source displays at the top of the INPUT SELECTION screen
To manually turn on the digital tuner hold:
2.Highlight DIGITAL TUNER HOLD and press ENTER
DVD DTV
HD (High-definitiondevice)
To label the video input sources:
2.Highlight INPUT LABELING and press ENTER
3.Press z or y to highlight the video source you want to label
Tuning to the next programmed channel
Using SpeedSurf to change to a specific programmed channel
Tuning to a specific channel (programmed or unprogrammed)
Switching between two channels using Channel Return
To select the picture size:
1.Press PIC SIZE on the remote control
Natural picture size
The entire picture is uniformly
The picture is
•None of the picture is hidden
Scrolling the Theater Wide picture (Theater Wide 2 and 3 only)
To set the CINEMA MODE to FILM:
To set the CINEMA MODE to VIDEO:
Selecting the display format (480p signals only)
To select the display format:
Using the POP double-windowfeature
Switching the main and POP pictures
Freezing the main picture in the POP double-window
Adjusting the size of the main and POP pictures
POP double-windowaspect ratio
Using the programmed channel scan feature
Using the favorite channel search feature
Selecting the picture mode
Adjusting the picture quality
Resetting the picture settings
Using the ALS (ambient light sensor)
Using the flesh tone feature
Using CableClear™ DNR (digital noise reduction)
Selecting the color temperature
Resetting the advanced picture settings
Advanced closed captions
Muting the sound
Selecting stereo/SAP broadcasts
Adjusting the audio quality
Using the sub-basssystem (SBS)
Using the StableSound® feature
Resetting your audio adjustments
Using the SRS WOW™ surround sound feature
Turning off the built-inspeakers
Selecting the optical audio output format
Selecting the AUDIO OUT sound
Memory card specifications
Viewing digital photos on your TV
5.Press y or z to select another picture as the large picture
6.Press ENTER to view your pictures in a slide show
During the slide show:
Memory card care and handling
To set the ON/OFF timer:
2.Highlight ON/OFF TIMER and press ENTER
5.When the AM/PM field is highlighted, press • to select AM or PM
7.Highlight SAVE and press ENTER
To turn off the ON/OFF timer:
Press RECALL to display the following information on-screen:
•Antenna mode (when in TV mode)
•Channel number or video input source selected
•Time (if set)
•ON timer setting (if set)
1. Press MENU and highlight the LOCKS menu icon
2. Press z, which displays the PIN code entering screen
When the correct PIN code is entered, the LOCKS menu (below) opens
1.Press MENU and highlight the LOCKS menu icon
2.Press z to display the PIN code entering screen
To block and unblock TV programs and movies:
2.Press z, which displays the PIN code entering screen
4.Press z to highlight ENABLE RATING BLOCKING
5.Press • and then z to select ON, and then press ENTER
6.Press z to highlight EDIT RATING LIMITS and press
To block channels:
3.Enter your four-digitPIN code (see page 84 for details)
4.Press z to highlight CHANNELS BLOCK and then press
6.Repeat step 5 for other channels you want to block
To unlock individual channels:
game device
To set the game timer:
4.Press z to highlight GAME TIMER and press ENTER
To cancel the game timer:
Select OFF in step 2 above
Page
Page
Setup Questions
Operational Questions
Page
Page
Limited United States Warranty
for 27'' FST PURE® and All Larger Television Models
Limited Canada Warranty
E F G
L M
O P
