Toshiba 51H93, 57H93, 65H93 Scrolling the Theater Wide picture (Theater Wide 2 and 3 only), Select OFF in step 3 above, To set the scroll settings:, Press MENU and open the VIDEO menu

Chapter 8: Using the TV’s features

Scrolling the Theater Wide picture (Theater Wide 2 and 3 only)

You can set separate scroll settings for Theater Wide 2 and Theater Wide 3 modes.

To set the scroll settings:

Using the auto aspect ratio feature (480i signals only)

When the AUTO ASPECT feature is set to ON and the TV receives a 480i signal, the picture size is automatically selected, as described in the following table.

1.Press MENU and open the VIDEO menu.2.Highlight THEATER SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Aspect ratio

of signal source

4:3

16:9

Not defined

(no ID-1 data)

Automatic aspect size

(automatically selected

when AUTO ASPECT is ON)

Theater Wide 2

Full

User-selected picture size

(see pages 64–65)

3.In the PICTURE SIZE field, select either Theater Wide 2 or Theater Wide 3 (you cannot scroll in any other mode).

4.Press z to highlight the PICTURE SCROLL field.5.Pressx or • to scroll the picture as needed, from –10 to +20.

Theater Settings						Theater Settings
Picture Size						Picture Size
			Theater Wide 2						Theater Wide 2
Picture Scroll		0				Picture Scroll		-10
Cinema Mode						Cinema Mode
				Video						Video
Display Format						Display Format
				1080i						1080i
Auto Aspect Ratio						Auto Aspect Ratio
				On						On
	Save	Done			Reset		Save	Done		Reset

6.To save your scroll settings temporarily, highlight DONE and press ENTER.To save your scroll settings permanently, highlight SAVE and press ENTER.

Note:

•The AUTO ASPECT feature applies to 480i signals received from the VIDEO 1, VIDEO 2, VIDEO 3, or ColorStream HD1/HD2 input sources only, and is not applicable to antenna, Cable, or DVI input sources.

•The AUTO ASPECT feature is not available when the POP double-window is open.

To turn on the AUTO ASPECT feature:

1.Press MENU and open the VIDEO menu.

2.Highlight THEATER SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

3.In the AUTO ASPECT RATIO field, select ON.4.To save your settings temporarily, highlight DONE and press ENTER.To save your settings permanently, highlight SAVE and press ENTER.

Theater Settings

Picture Size		Natural
Picture Scroll	0
Cinema Mode
		Video
Display Format
		1080i
Auto Aspect Ratio
		On

Save Done Reset

To turn off the AUTO ASPECT feature:Select OFF in step 3 above.

66 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.