118 Picture and Sound Controls

Adjusting the audio

Muting the sound

Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute)
the sound. Each time you press the MUTE button, the mute mode
changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc.
NOTE
If you modify items in the Sound menu while Mute is active, Mute is
cancelled.

Selecting stereo/SAP broadcasts

The MTS (multi-channel TV sound) feature is only available for analog
signals on the ANT/CABLE input. When the TV receives a stereo or SAP
(second audio program) broadcast, the icon STEREO or SAP appears on
screen when the INFO button is pressed.
To listen in stereo sound:
1 Press the SETUP button.
2 Select Sound > MTS and press the OK button.
3 Press the p/q (arrow) buttons to select Stereo.
4 Press the EXIT button.
NOTE
v You can typically leave the TV in Stereo mode because it outputs the
type of sound being broadcast (stereo or monaural).
vIf the sound is noisy, select Mono.
vIf there is no sound in SAP mode, select Stereo.

Adjusting the audio balance

You can adjust the audio balance.
1 Press the SETUP button.
2 Select Sound > Balance and press the OK button.
3 Press the t/u (arrow) buttons to adjust the balance.
4 Press the EXIT button.

Adjusting the range

You can adjust bass and treble.
1 Press the SETUP button.
2 Select Sound > Bass or Treble.
Adjusting the audio