64 Initial Setup and Menu
Volume Control
1 Use the t/u (arrow) buttons
to set up the Volume control to
select:
vTV (this is the default)
vExternal
The Volume + or – and MUTE buttons will control the
External equipment through the IR blaster.
2 Press the OK button.
Press the OK button on the IR Blaster Setup complete screen.
Support Information screen will appear.
Guide Preferences
1 Use the t/u (arrow) buttons
to set up the Guide preferences
to select:
vTV MediaGuide
vExternal Device Guide
2 Press the q (arrow) button to select Interval Time.
v0.125 sec
v0.25 sec
v0.375 sec
v0.5 sec
v0.625 sec
v0.75 sec
v0.875 sec
v1 sec
v After the interval time is selected, press the RED button to
show the Test screen. The test will start automatically.
3 Press the OK button.
Press the OK button on the IR Blaster Setup complete screen.
Support Information screen will appear.
8 Support Information
Read through the information, and press the OK button.
vThe initial setup is completed.
NOTE
Refer to this information if there is a problem and you need to contact
Customer Support. To find help, the following operation can be performed
at any time. SETUP button > Get Help > System Information > OK
button.
Performing the initial setup