40 Connecting Your TV
HDMI
OUT
DVI/HDCP
OUT
R
L
OUT
IN
PC/HDMI 2
AUDIO
HDMI IN
4
HDMI IN
HDMI IN
Analog audio cable
HDMITM-to-DVI adapter cable
HDMITM cable
DVI device
TV back panel HDMITM device (satellite or
cable box, media player, etc)
(Sample Illustration) L9300UC Series—Connecting an HDMI or DVI
device to the HDMI Input
To view the HDMI device video:
Select HDMI 1, HDMI 2, HDMI 3 or HDMI 4 video input source
on the TV. (Press the INPUT button on the remote control. For more
information, see “Selecting the video input to view” on page 85.
To connect a DVI device, you will need:
HDMI to DVI adapter cable
For proper operation, the length of an HDMI to DVI adapter cable
should not exceed 9.8 ft (3m). The recommended length is 6.6 ft
(2m).
3.5mm Stereo to RCA Y-cable
An HDMI to DVI adapter cable transfers video only. Separate
analog audio cables are required (see illustration).
NOTE
To ensure that the HDMI or DVI device is reset properly:
When turning on your electronic components, turn on the TV first, and
then the HDMI or DVI device.
When turning off your electronic components, turn off the HDMI™ or
DVI device first, and then the TV.
NOTE
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed
digital video with high-bandwidth digital content protection, which is being
standardized for reception of high definition video signals. Because this is
an evolving technology, it is possible that some devices may not operate
properly with the TV.
Connecting an HDMIor DVI device to the HDMI input