62 Initial Setup and Menu
vCD Player
vVideo Accessory
2 Press the q button then press the GREEN button.
The Brand screen will appear.
3 Use the p/q (arrow) buttons to select the brand name then
press the OK button.
vSelect a eld and press the OK button to show the
software keyboard. Enter the rst few characters of the
brand name and press the Green button. The brand name
starting with the entered characters will appear on the
Brand screen.
4 Press the OK button.
Model Name screen will appear.
Model Name
1 Press the GREEN button.
The Model Name screen will appear.
2 Use the p/q (arrow) buttons to select the model name then
press the OK button.
vSelect a eld and press the OK button to show the
software keyboard. Enter the rst few characters of the
model name and press the GREEN button. The model
name starting with the entered characters will appear on
the Model Name screen.
3 Press the q (arrow) button to select Code Set then press the
OK button.
Code Set screen will appear.
Code Set
1 Use the t/u (arrow) buttons to select the code.
vAfter the code is selected, press the RED button to show
the Test screen. The test will start automatically.
NOTE
If a model has more than one Code Set, a message will appear stating “This
model has more than one Code Set. Please select and test your preferred
Code Set.” You will need to choose a code set using the p/q (arrow)
buttons and perform the Test option to ensure the correct Code Set has
been selected.
Performing the initial setup