Toshiba 58L9300UC, 65L9300UC, 84L9300UC Assisted Setup, Manual Setup

Advanced features 127
To cancel searching for the AP:
❖Press the BACK button while searching for the AP. A message
appears. Press the t/u (arrow) buttons to select Yes, and then press
the OK button.
Assisted Setup
1 Press the SETUP button.
2 Select Network > Network Setup > Wireless Setup and press the
OK button.
3 Press the p/q (arrow) buttons to select Assisted Setup and press
the OK button.
4 Press the p/q (arrow) buttons to select the desired AP, and then
press the OK button.
NOTE
Check the MAC address on the label or in the manual of the AP and select
an AP.
5 Select Security Key, and then press the OK button.
The Software Keyboard appears.
6 Input the Security Key using the Software Keyboard. For more
information, see “Using the software keyboard” on page 133.
7 To save your settings, press the GREEN button.
NOTE
The Security Key must adhere to the following conditions:
❖TKIP/AES: 8-63 ASCII or 64 Hex characters
❖WEP: 5 or 13 ASCII or 10 or 26 Hex characters
8 Select Done, and then press the OK button.
NOTE
Settings are not saved if the BACK button is pressed before Done is
selected.
Manual Setup
1 Press the SETUP button.
2 Select Network > Network Setup > Wireless Setup and press the
OK button.
3 Press the p/q (arrow) buttons to select Manual Setup, and then
press the OK button.
Setting up the Network