Advanced features 129
NOTE
Settings are not saved if the BACK button is pressed before Done is
selected.

Wireless Information

The settings congured in Wireless Setup can be conrmed.
1 Press the QUICK button.
2 Select Wireless Information, and then press the OK button.
3 Press the RED button to check the availability of surrounding APs.
A Wireless Information screen appears when a connection is
successfully made.
Item: Description:
Status The message, “Connected” appears when the TV is connected to
the AP
The message, “Disconnected” appears when the TV is disconnected
from the AP
Signal Connection signal strength with the AP (STRONG/MEDIUM/WEAK)
Speed The link speed with the AP
Mode Working mode (11a, 11b, 11g, 11n)
Channel The channel in use (1-165)
Network name SSID set
Authentication Authentication set
Encryption Encryption set
Security key Security Key set
AP MAC address The AP’s MAC address appears when the TV is connected to the AP
TV MAC address The TV’s MAC address
DHCP The message, “Enabled” appears when you use DHCP.
The message, “Disabled” appears when you do not use DHCP.
IP address The TV’s IP address
Subnet Mask Value of the Subnet Mask
Default Gateway Default GATEWAY’s address
DNS DNS’s address
NOTE
Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or
TKIP, the Speed value might be low. We recommend that the Encryption
setting are changed to AES (Under manual setup).
Setting up the Network