Toshiba 705T Setting Phone Lock, Using Your Handset while Phone Lock is Activated, Tip, Note, Settings, Power On:, Phone Lock, Phone Closed:, Power Saving:

Note

When the phone lock is activated, the information prompt (page 38) does not appear.

Tip

When the phone lock is activated, you can still perform the following operations.

・Turn the power on and off.

・Enter the PIN1 code if the PIN1 Code Request (page 240) is set to On.

・Cancel the phone lock temporarily.

・Make calls to 110 (police), 119 (fi re and ambulance) and 118 (coast guard).

・Answer voice calls and video calls (but the Open to Answer and Any Key Answer functions are unavailable).

・Place calls on hold (page 56).

・Divert calls (page 65).

・Reject calls (page 56).

・Adjust the ringtone volume while a call is being received (page 56).

・Stop the alarm.

・Pause the V-appli (page 180) set to run in standby mode.

Phone Lock

Set Phone Lock to prevent others from using your handset. When Phone Lock is activated, your security code (page 54) is required to use the handset.

Setting Phone Lock

1.In standby mode, press @, select Settings and press J(Select).

2.Select Security Settings and press J(Select).

3.Select Phone Lock and press J(Select).

4.Enter your security code (page 54).

5.Select an item and press J(Select).

◆Phone Closed: Phone Lock is activated when you close your handset.

◆Power Saving: Activate Phone Lock when your handset goes into power saving mode.

◆Power On: Activate Phone Lock when the handset is powered on.

6.Select On and press J(Select).

The indicator appears on the standby window when the Phone Lock is activated.

Using Your Handset while Phone Lock is Activated

To use your handset while Phone Lock is activated, enter your security code and press

J(OK).

Settings 242