Tip

If the DST setting is set to On, the indicator appears on the display when you set (page 51) or display (page 270) the world clock. The

indicator appears for the time displayed in standby mode.

Tip

To reset all city names, select Reset City Name after Step 1.

Setting the GMT Offset

Select a city by entering a GMT time difference.

1.After Step 5 of “Setting City 1/City 2” (page 51), press J(Options).

2.Select GMT Offset and press J(Select).

To switch between + and -, press J(Options) and select +/-.

3.Use Gto select the time difference and press @twice.

Setting the Daylight Saving Time (DST)

1.After Step 5 of “Setting City 1/City 2” (page 51), press J(Options).

2.Select DST On/Off and press J(Select).

3.Select On or Off and press J(OK).

Editing City Names

1.After Step 5 of “Setting City 1/City 2” (page 51), press J(Options).

2.Select Edit City Name and press J(Select).

3.Enter a city name and press @.

Switching the Main City

1.After Step 4 of “Setting City 1/City 2” (page 51), select Set as Main City and press J(Select).

2.Select City 1 or City 2 and press J(Select).

Basic Operations

52