4.27 Battery lock 4 Replacement Procedures
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-79
Installing the Battery lock
To install the battery lock, follow the steps below and refer to Figure 4-49.
1. Insert the sticks of the battery lock L and battery lock R into the springs.
2. Turn up the insulator (BATT LOCK L INSULATOR) and set the battery lock L to
the slot.
3. Set (push) the battery lock button L to the battery lock L until the latches are
engaged.
4. Set the battery lock R to the slot.
5. Set (push) the battery lock button R to the battery lock R until the latches are
engaged.