4 Replacement Procedures 4.36 Fluorescent Lamp
Installing the fluorescent lamp
To install the 15.4-inch WXGA-CSV LG fluorescent lamp, follow the steps below and refer
to figures 4-89 to 4-92.
Assembly of Cover Ass’y, Sheets, Light guide, Tape Adhesive and Board Ass’y and Case
top
1. Assembly of Cover Ass’y and Screw (2Points)1.
CAUTION: Maximum value of torque with Screw should be below 2.5kgf.
2. Assembly of Light Guide and Sheets2 (Reflector Sheet fixing with one Double
Tape).
CAUTION: No penetration of foreign body is indispensable with any scratch on the
surface of each Sheets and Light guide.
3. Assembly of Tape adhesive3 used for Sheets fixing (4Point).
4. Assembly of Board Ass’y4.
CAUTION: Pressure or stress should not be given on PCB and COF.
5. Assembly of Case top5.
Figure 4-89 Replacing 15.4-inch LG fluorescent lamp (WXGA-CSV) (5)
4-130 [CONFIDENTIAL] TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)