4 Replacement Procedures 4.33 LCD harness
4. Remove the LCD harness from the guides and pass the LCD harness through the
hole of the hinge.
LCD harness
Hole
Guide
Guide
Figure 4-64 Removing the LCD harness (2)
Installing the LCD harness
To install the LCD harness, follow the steps below and refer to Figure 4-62 to 4-64.
1. Pass the LCD harness through the hole of the hinge and arrange the LCD harness
under the guides.
2. Set the harness holder L to the holes of the guides and slide the harness holder L
until the hook is engaged.
3. Turn the cover assembly face up.
4. Arrange the LCD harness under the guide and secure it with the insulator.
4-104 [CONFIDENTIAL] TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)