4 Replacement Procedures 4.31 LCD unit/FL inverter
2. Peel off the LCD mask seals and remove the following screws.
• M2.5×5B FLAT HEAD screw ×2
3. Separate the LCD cover and cover assembly while releasing the latches.
M2.5x5B FLAT HEAD
M2.5x5B FLAT HEAD
LCD mask seal
LCD cover
LCD mask seal
Slit
Figure 4-57 Removing the LCD cover
4-90 [CONFIDENTIAL] TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)