Toshiba A100 manual Replacing TDM fluorescent lamp4

4.25 Fluorescent lamp 4 Replacement Procedures

3.Removing bezel <Procedure>

1)Turn over the module with the insulating sheet.

2)Releases latches of the bezel and frame (3 points).

3)Lift up slowly the bottom side (Back light side) of bezel and release latches (3 points)at the upper to remove the bezel. Note that the bezels at the upper and lower are fixed with double-sides tape.

Caution: 1. When releasing the upper latches, do not damage the TAB. 2. When removing the bezel, do not deform the bezel.

Latches

Figure 4-47 Replacing TDM fluorescent lamp(4)

PORTEGE A100 Maintenance Manual (960-460) 4-59