Toshiba A100 - page 236

4.23 LCD cable/Wireless LAN antenna / Bluetooth antenna 4 Replacement Procedures
PORTEGE A100 Maintenance Manual (960-460) 4-49
2. Set the hinge cover. When setting, do not make the LCD cable and Bluetooth antenna
cables pinched, and do not mistake the direction.
3. Open the insulator wrapping the LCD cable, wrap the LCD cable fixing and apply the
acetate tape at two points of the insulator and one point of the LCD cable.
4.23.2 Wireless LAN antenna
Removing the wireless LAN antenna
To remove the wireless LAN antenna, perform the following procedure. (See Figure 4-39, 4-
40.)
1. Peel off the five acetate tapes and wireless LAN antenna.
2. Remove the left side hinge cover (viewing from the front).
Wireless LAN antenna
Antenna cable
(
White
)
Hinge cover
Acetate tapes
Acetate tapes
Antenna cable
(Black)
Figure 4-39 Removing the wireless LAN antenna