Toshiba A100 manual Accessing the Setup Program, Boot Priority

3.26 SETUP 3 Test and Diagnostics

3.26.2 Accessing the SETUP Program

Selecting 0-SETUP from the DIAGNOSTICS MENU and pressing Enter displays the followings:

SYSTEM SETUP (1/2) ACPI BIOS version = X.XX

MEMORY

Total		= XXXXX KB
	SYSTEM DATE/TIME
Date(MM
	-DD-YY)	= XX-XX-XXXX
Time(HH:MM:SS)		= XX:XX:XX

BATTERY

Battery Save Mode = Full Power

PASSWORD

Not Registered

BOOT PRIORITY

Boot Priority =HDD→FDD→CD-ROM→LAN

HDD Priority = Built-in HDD→PC Card

Network Boot Protocol = PXE

DISPLAY

Power On Display		= Auto-Selected
LCD Display Stretch		= Enabled
TV Type		= NTSC(Japan)
	Others
		= Boot
Power-up mode
CPU Cache		= Enabled
Level 2 Cache		= Enabled
Dynamic CPU Frequency Mode
	= Dynamically Switchable
Auto Power On		= Disabled
Sound Logo		= Enabled
Power Button Lamp		= Mode 1

−↓→←: Select items Space, BkSp: Change values PgDn, PgUp: Change pages

Esc: Exit without saving Home : Set default values End: Save changes and Exit

				SYSTEM SETUP (2/2)			ACPI BIOS version = X.XX
	CONFIGURATION
						PC CARD
Device Config.			= Setup by OS				= Auto-Selected
					Controller Mode
	DRIVES I/O
						PERIPHERAL
Built-in HDD								Device	= Enabled
		= Primary IDE(1F0H/IRQ14)			Internal Pointing
					Hard Disk Mode		= Enhanced IDE(Normal)
CD-ROM		= Secondary IDE(170H/IRQ)

LEGACY EMULATION

PCI BUS

PCI BUS = IRQ10,IRQ11

USB KB/Mouse Legacy Emulation

			= Enabled
USB-FDD Legacy Emulation			= Enabled
	PCI LAN
		= Enabled
Built-in LAN

−↓→←: Select items Space, BkSp: Change values PgDn, PgUp: Change pages

Esc: Exit without saving Home: Set default values End: Save changes and Exit

PORTEGE A100 Maintenance Manual (960-460) 3-67