Toshiba A100 - page 202

4.6 Keyboard holder/Keyboard 4 Replacement Procedures
PORTEGE A100 Maintenance Manual (960-460) 4-15
4. Remove the keyboard.
Installing a keyboard
The following describes the procedure for installing a keyboard. (See Figure 4-7, 4-8.)
1. Set the keyboard on the palm rest with the back up and connect the keyboard cable to
the connector PJ3200 on the system board.
2. Turn down the keyboard on the palm-rest and insert the latches under the palm rest.
3. Fix the keyboard with the following screws.
• M2×4Z BIND screw x2