Fujitsu USDLH532 manual Configuration of the Wlan Device, Configuring the Wlan Using Windows

Configuration of the WLAN Device

The optional WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows. Support for most industry standard security solutions is contained in this software.Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters:

Configuring the WLAN Using Windows

1Click the Start button, then select Control Panel.

2If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network and Sharing Center icon.

3Select “Manage wireless networks” from the left panel.

4Click on the [Add] button.

5Depending upon what type of connection you would like to make, make a selection. For an infrastructure network, select “Manually create a network profile. For ad hoc network, select “Create an ad hoc network”.

6Enter the required information. You may need to consult with your network administrator for some information.

7In the event you require assistance, go to the Network and Sharing Center window (Start -> Control Panel -> Network and Sharing Center), and type in relevant keywords in the Search box.

Connecting to a Network

After you have configured your computer, you can connect to an active network by performing the following steps:

1Click on the WLAN icon in the system tray.

2Select “Connect to a network”.

3Select a network from the list that appears, and click the [Connect] button.

Connection to the network

After you have configured your computer, you can connect to an active network by clicking on the Wireless Network icon in the system tray:

116 - Configuration of the WLAN Device