Fujitsu USDLH532 Before Using the Wireless LAN, Wireless LAN Devices Covered by this Document

Before Using the Wireless LAN

This manual describes the procedures required to properly setup and configure the optional integrated Wireless LAN Mini Card device (referred to as “WLAN device” in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure it's correct operation.

Wireless LAN Devices Covered by this Document

This document is applicable to systems containing the following WLAN device:

•Intel Centrino® Wireless-N 2200 wireless LAN device

Characteristics of the WLAN Device

•The WLAN device is a Mini-PCI card attached to the main board of the mobile computer.

•The WLAN device operates in license-free RF bands, eliminating the need to procure an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands.

•The WLAN device is capable of four operating modes, IEEE802.11b, IEEE802.11g, and IEEE802.11n.

•The WLAN device is Wi-Fi certified and operate (as applicable) at a the maximum data rate of 540 Mbps (theoretical) in IEEE802.11n mode; 54 Mbps in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.

•The WLAN device supports the following encryption methods - WEP, TKIP, CKIP, and AES encryption.

•The Wireless LAN device is compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0.

112 - Before Using the Wireless LAN