Fujitsu USDLH532 manual From the Boot menu. See Bios Setup Utility on

Problem	Possible Cause	Possible Solutions
The battery seems to	The brightness is turned all the	Turn down the brightness adjustment. The higher the brightness the more power
discharge too quickly.	way up.	your display uses.
(continued)
	Battery was exposed to high	Replace the battery.
	temperatures.
	The battery is too hot or too	Restore the notebook to normal operating temperature. Charging icon on the Sta-
	cold.	tus Indicator panel will flash when battery is outside of operating range.
Shutdown and Startup Problems
The Suspend/Resume button	Suspend/Resume button is dis-	Select the “Choose what the power button does” option.
does not work.	abled.
	There may be application soft-	Close all applications and try the button again.
	ware conflict
The system powers up, and	Boot sequence settings of the	Set the operating source by pressing the [ESC] key while the Fujitsu logo is on
displays power on informa-	setup utility are not compatible	screen or use the [F2] key and enter the setup utility and adjust the source settings
tion, but fails to load the	with your configuration.	from the Boot menu. See “BIOS Setup Utility” on page 36.
operating system.
	Internal hard drive was not	Use the BIOS setup utility or Primary Master submenu, located within the Main
	detected.	menu, to try to auto detect the internal hard drive.
	You have a secured system	Make sure you have the right password. Enter the setup utility and verify the Secu-
	requiring a password to load	rity settings and modify them as accordingly. See “BIOS Setup Utility” on page 36.
	your operating system.
An error message is displayed	Power On Self Test (POST) has	See the Power On Self Test (POST) messages to determine the meaning and sever-
on the screen during the	detected a problem.	ity of the problem. Not all messages are errors; some are simply status indicators.
notebook (boot) sequence.		See “Power On Self Test Messages” on page 71.
	The BIOS CMOS hold-up battery	Contact your support representative for repairs. This is not a user serviceable part
	has failed.	but has a normal life of 3 to 5 years.
Your notebook appears to	BIOS setup changes were not	Make sure you select Save Changes And Exit when exiting the BIOS setup utility.
change setup parameters	saved before you exited the util-
when you start it.	ity.

68 - Troubleshooting