Memory Cover

Figure 27. Removing the Memory Cover Screws

Figure 28. Opening the Memory Compartment

THE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK. ONCE IT IS INSTALLED, YOU SHOULD LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY CAPACITY.

Removing a Memory Upgrade Module

1Perform steps 1 through 4 of Installing a Memory Upgrade Module.

2Pull the clips sideways away from each side of the memory upgrade module at the same time.

3While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your notebook. (Figure 30)

4Store the memory upgrade module in a static guarded sleeve.

5Replace the cover and reinstall the screws.

55 - Memory Upgrade Module

Page 61
Image 61
Fujitsu USDLH532 manual Removing a Memory Upgrade Module, Memory Cover