Strong stress is applied to the AccuPoint.
If an error message appears, reboot the computer. If an error message does not appear, wait a moment for the pointer to stop, then continue operation.
Replacing the cap
The AccuPoint cap is an expendable item that should be replaced after prolonged use. The spare AccuPoint cap is supplied with some models.
1.To remove the AccuPoint cap, firmly pinch the cap and pull it straight up.
Figure 4-2 Removing the AccuPoint cap
1
1.AccuPoint cap
2.Position a new cap on the peg and press it into place.
The peg is square, so be careful to align the cap’s square hole with the peg.
Using the Fingerprint Sensor
This product has a fingerprint utility installed for the purpose of enrolling and recognizing fingerprints. By enrolling the ID and password onto the fingerprint authentication feature, it is no longer necessary to input the password from the keyboard. Fingerprint feature enables you to:
Logon to Windows and access a security enabled homepage through Internet Explorer.
Files and folders can be encrypted/decrypted and third party access to them prevented.
Unlock the
Authentication of the User Password (and, if applicable, the HDD/SSD Password) when booting up the computer
Fingerprint cannot be used in models that do not have a fingerprint module installed.
User's Manual |
