
2.Plug one end of the cable into the LAN jack. Press gently until you
hear the latch click into place.
Figure 4-8 Connecting the LAN cable
2
1
1. LAN jack | 2. LAN cable |
3.Plug the other end of the cable into a LAN hub connector or router. Check with your LAN administrator and hardware or software vendor before using or configuring a network connection.
Additional memory module
You can install additional memory into the computer in order to increase the amount of system memory that is available. This section describes how to install and remove optional memory modules.
You should place a mat beneath the computer in order to prevent the computer's lid from becoming scratched or damaged when you are installing/replacing the memory module. In this instance you should avoid mats that are made of materials that hold or generate static electricity.
When installing or removing a memory module, you must ensure that you do not touch any other internal areas of the computer.
Use only memory modules approved by TOSHIBA.
Do not try to install or remove a memory module under the following conditions.
a. The computer is turned on.
b. The computer was shut down in either Sleep or Hibernation Mode. c.
d. The wireless communication function is on.
Be careful not to let screws or other foreign matter fall into the computer. It could cause malfunction or electric shock.
Additional memory module is a precision electronic component that may be fatally damaged by static electricity. Since the human body can carry static electricity, it is important that you discharge yourself before touching or installing any additional memory modules. To discharge your body’s static electricity, simply touch any metal close to you with bare hands.
User's Manual |