Do not remove the memory media while the computer is in Sleep or Hibernation Mode. The computer could become unstable or data in the memory media could be lost.
Do not remove only the miniSD/microSD Card while leaving the adaptor in the memory media slot.
ExpressCard
Some models are equipped with a single ExpressCard slot into which any ExpressCard device that meets industry standards, either manufactured by TOSHIBA or another vendor, can be installed. The slot supports hot plug connection and utilizes the PCI Express interface that supports the reading and writing of data at a theoretical maximum rate of 2.5Gbps.
Inserting an ExpressCard
The Windows
Do not insert an ExpressCard while the computer is in Sleep Mode or Hibernation Mode as you may find that some cards do not work properly.
To insert an ExpressCard, follow the steps as detailed below:
1.Press the Dummy card in order to eject the Dummy card partially out of the computer.
2.Grasp the Dummy card and draw it.
3.Insert the ExpressCard into the ExpressCard slot on your computer.
4.Press the ExpressCard gently to ensure a firm connection is made.
Figure 4-15 Inserting the ExpressCard
1
2
1. ExpressCard slot | 2. ExpressCard |
5.After inserting the ExpressCard you should refer to its documentation and also check the configuration in Windows in order to ensure that it is correct.
Removing an ExpressCard
To remove an ExpressCard, follow the steps as detailed below.
User's Manual |
