103
Learning the Basics
Toshiba’s online resources
5.375 x 8.375 ver 2.3
To use any of these methods, you first need to enable them in
Toshiba’s Power Saver utility.
1Click Start, Control Panel, Performance and
Maintenance, and then Tosh ib a Po wer Sav er.
2Click the Setup Action tab.
3Select Standby for the options you want.
When I press the power button
Set this option to Standby to put the computer into
Standby mode when you press the power button.
When I close the lid
Set this option to Standby to put the computer into
Standby mode when you close the display panel.
4Click Apply.
5Click OK.
For more information about the Power Saver utility, see
“TOSHIBA Power Saver” on page 147.

Starting again from Standby mode

To start up the computer from Standby mode, press the power
button until the on/off light changes to green. The computer
returns to the screen you were using.
If you put the computer in Standby mode by closing the
display panel, you can start it again by opening the display
panel.
Toshiba’s online resources
Toshiba maintains a number of online sites to which you can
connect. These sites provide information about Toshiba
products, give help with technical questions and keep you up
to date with future upgrades. For more information, see
“Contacting Toshiba” on page205.
NOTE