Toshiba A85 Installing a memory module

55
Getting Started
Adding memory
5.375 x 8.375 ver 2.3
Installing a memory module
Additional memory modules can be installed in the memory
module slots on the base of the computer. You will need a
standard Phillips No. 1 screwdriver for this procedure.
Before adding external devices or memory, Toshiba
recommends setting up your software. See “Setting up your
software” on page 45.
To avoid damaging the computer’s screws, use a standard
Phillips No. 1 screwdriver that is in good condition.
Installing a memory module with the computer’s power on may
damage the computer, the module, or both.
The computer has two memory module slots — Slot A and
Slot B. You can install one or two memory modules.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
If the computer is on, begin at step 1; otherwise, skip to step
3.
1If the computer is on, click Start, Turn off computer.
The Turn off computer window appears.
NOTE