26
INPUT DISPLAY
INPUT DISPLAY
Locking the video inputs
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, COLORSTREAM HD, HDMI, PC) and channels 3
and 4. You will not be able to select the input sources with the INPUT
button or Channel buttons unless you clear the setting.
To set up the video lock:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the LOCKS menu.
3. Press or to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press or to highlight VIDEO
LOCK.
6. Press or to select:
OFF: Unlocks all video input
sources.
VIDEO: Locks VIDEO1, VIDEO2,
COLORSTREAM
HD, HDMI, PC
.
VIDEO +: Locks VIDEO1, VIDEO2, COLORSTREAM HD,
HDMI, PC, channel 3 and channel 4. This option should be used
if you use the antenna terminal to play a video tape.
7. Press EXIT to return to normal viewing.
Note:

After programming VIDEO LOCK, change

channels or press the INPUT key before

turning off the television.

LOCKS
LOCK
CH LOCK
VIDEO LOCK
GAME TIMER
:SELECT :ADJUST
OFF
OFF
OFF / VIDEO / VIDEO+
CH LOCK :CH 002
SET / CLEAR TV CABLE
LOCKED CH 0 0 0
0 0 0
0 0 0
RETURN
:SELECT :ADJUST
ENTER :SET
Menu/
Enter
Exit
Channel
Numbers
INPUT
LOCKS
LOCK
CH LOCK
VIDEO LOCK
GAME TIMER
:SELECT :ADJUST
OFF
OFF
Locking channels
With the CH LOCK feature, you can lock specific channels. You will not
be able to tune locked channels unless you clear the setting. You can
choose to lock up to nine TV channels and nine cable channels.
1. Press TV to select the TV mode.
2. Use the Channel Number buttons (0-9 and 100) to display the
television channel you wish to lock.
3. Press MENU, then press or to display the LOCKS menu.
4. Press or to display the password entering mode.
5. Use the Channel Number buttons
(0-9) to enter your password, then
press ENTER. The LOCKS menu
appears.
6. Press or to highlight CH
LOCK and press to display the
CH LOCK menu.
7. Press or to select the follow-
ing:
SET to set the channel as one
to be locked. Then press
ENTER.
CLEAR to clear all channels
from the list of locked channels.
Then press ENTER.
8. Repeat steps 1 through 7 to lock other channels. When you are
finished locking channels, press EXIT to return to normal viewing.
If you try to tune a locked channel, the TV will not display it, but will
display the nearest unlocked channel.
To unlock channels:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the LOCKS menu.
3. Press or to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press or to highlight CH LOCK and press to display the
CH LOCK menu.
6. Press or to highlight CLEAR and clear all channels from the
list of locked channels. Press ENTER.
7. Press EXIT to return to normal viewing.
Note:

After programming CH LOCK, change

channels before turning off the television.

Menu/
Enter
Exit
Channel
Numbers
Note:
If the remote control does not operate your TV,
press the TV button on the remote control
and try again.
TV
TV
Using the TVs Features
J3U70221A(E)P25-28 05/08/2005, 10:14 AM26