Resetting your audio adjustments
The RESET function returns the audio adjustments to the following
factory settings: |
|
Bass | center (25) |
Treble | center (25) |
Balance | center (0) |
To reset your audio adjustments:
1.Press TV to select the TV mode.
2.Press MENU, then press 
or 
to display the AUDIO menu.
3.Press ▲ or ▼ to highlight RESET, and then press 
.
AUDIO |
|
WOW SRS 3D | OFF |
FOCUS | OFF |
TruBass | OFF |
HDMI | HDMI / DVI |
RESET |
|
:SELECT | :ADJUST |
Using the StableSound® feature
The StableSound feature limits the highest volume level to prevent extreme changes in volume when the signal source is changed.
To turn on the StableSound® feature:
1.Press TV to select the TV mode.
2.Press MENU, then press 
or 
to display the AUDIO menu.
3.Press ▲ or ▼ to highlight STABLE SOUND.
4.Press 
or 
to highlight ON.
A U D I O |
|
M T S | STEREO |
B A S S | 25 |
T R E B L E | 25 |
B A L A N C E | 0 |
STABLE SOUND | ON / OFF |
:SELECT | :ADJUST |
To turn off the StableSound® feature:
Highlight OFF in step 4 above.
Using the WOW™ surround sound feature
WOW is a special combination of SRS Labs audio technologies that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider. WOW consists of three features; SRS 3D, FOCUS, and TruBass.
To adjust the WOW feature:
1.Press TV to select the TV mode.
2.Select STEREO mode (see “selecting stereo/SAP broadcasts” on page 36).
3.Press MENU, then press 
or 
to display the AUDIO menu.
4.Press 
or 
to highlight the desired WOW feature you want to adjust.
•SRS 3D — To turn on or off the surround sound effect.
•FOCUS — To turn on or off the vocal emphasis effect.
•TruBass — To select your desired bass expansion level
(HIGH, LOW or OFF).
AUDIO |
| |
WOW SRS 3D | ON / OFF | |
| FOCUS | OFF |
HDMI | TruBass | OFF |
| HDMI | |
RESET |
| |
:SELECT | :ADJUST | |
5. Press | or | to adjust the item. |
WOW, SRS and 
symbol are trademarks of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc.
37
INPUT DISPLAY
TV
Menu
Notes:
•If the broadcast is monaural, the SRS 3D effect will not work.
•The headphone jack do not output any of the WOW audio features.
TV
Menu
Note:
If the remote control does not operate your TV, press the “TV” button on the remote control and try again.
Introduction
Connecting your TV
Setting up your TV
Using the TV’s Features
Appendix
37 | 05/08/2005, 10:15 AM |
