Introduction Connecting your TV Setting up your TV Using the TV’s Features Appendix
33
INPUT DISPLAY
Setting the sleep timer
You can set the TV so it turns off automatically.
To set the sleep timer:
Repeatedly press SLEEP on the remote control to set the length of
time until the TV turns off. The clock will increase 10 minutes for each
press of the SLEEP button (0h00m, 0h10m, ...1h50m, 2h00m). After
the sleep timer is programmed, the display will appear briefly every
ten minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press SLEEP one time. The remaining time will be momentarily
displayed.
To cancel the sleep timer:
Repeatedly press SLEEP until the display turns to 0h00m.
Using the closed caption feature
The Closed Caption feature has two options:
•Captions—An on-screen display of the dialogue, narration, and
sound effects of programs and videos that are closed-captioned
(usually identified in your local TV listing as “CC”).
•Text—An on-screen display of information not related to the
program, such as weather or stock data (if available in your viewing
area).
To view captions or text:
1. Press TV to select the TV mode.
2. Tune the TV to the desired program.
3. Press MENU, then press or to display the SETUP menu.
4. Press ▲ or ▼ to highlight CLOSED CAPTION.
5. Press or to select the desired Closed Caption mode, as
follows:
•To view captions, select C1 or C2 (C1 displays translation of the
primary language in your area).
Note: If the program or video you selected is not closed-
captioned, no captions will display on-screen.
•To view text, select T1 or T2. Note: If text is not available in your
viewing area, a black rectangle may appear on-screen. If this
happens, set the Closed Caption feature to OFF.
•To turn the Closed Caption feature off, highlight OFF in the
Closed Caption menu.
Note:

A closed caption signal may not be decoded

in the following situations:

•when a video tape has been dubbed

•when the signal reception is weak

•when the signal reception is non-standard

SETUP
CLOSED CAPTION
PICTURE SIZE
CINEMA MODE
ASPECT
BACK LIGHTING
:SELECT :ADJUST
OFF
C1 / C2 / T1 / T2 / OFF
FILM
ON
16
Menu
TV
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
Sleep
Using the TV’s Features
J3U70221A(E)P31-36 05/08/2005, 10:14 AM33