BEFORE CALLING THE SERVICEMAN

WHEN

CHECK

TREATMENT

 

 

 

does not operate

Is there a power outage?

Please confirm whether a power failure or fuse

 

Is the circuit breaker or fuses cut off?

breaker is cut. Then draw out power supply

 

Is the machine’s plug properly inserted into

plug, insert once again and turn the power

 

an AC socket?

switch on.

 

Is the power switch ON?

 

 

 

 

making noise

Is there the inclination of the laundry?

Please correct the inclination or non stability

 

Is your washing machine installed on an

of laundry in the washing machine.

 

inclined or uneven surface?

 

 

 

 

 

Are there match sticks, hairpins or metal

Remove them.

 

objects being washed with the laundry?

 

 

 

 

 

Is there a foreign object caught under the

Remove the center screw, lift the pulsator out

 

pulsator?

and remove the foreign object.

 

 

 

 

Groan sounds during water supply.

Water intake valve buzzes.

 

 

 

water leak

Is the faucet shape suited?

Adjust the inside ring of the hose union or

 

 

change faucet shape (Refer to p.13)

 

 

 

 

Are the hose coupling and the nozzle loose?

Re-attaching the water (Refer to p.13)

 

 

 

 

Is the water inlet nut loose?

Re-attaching the water supply hose (Refer to

 

Is the water supply hose connector clogged?

p.13)

 

 

 

does not beep the

If you turn the power on and press START

Reset the end buzzer sound to turn on refer-

end buzzer

pad immediately, it may not beep the end

ring to "If you wish to turn off the end buzzer

 

buzzer.

sound. (p. 6)"

 

Is the end buzzer turned off?

 

 

 

 

Error Indication List

In the case the buzzer sounds and the select display flash alternatively.

The display of "LINEAR WATEL LEVEL" indicates the error condition as shown below.

WHEN

CHECK

TREATMENT

 

Is the drainage hose properly connected to the machine?

Open and close the lid once and

 

Is the drainage hose bent?

then press the START button.

 

Is the drainage hose laid down?

 

Is the drain water frozen?

Is the outlet of the drainage hose sunk in water?

Is the drainage hose clogged?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is there not the inclination of the laundry?

Please repair the inclination of a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is your washing machine installed on an incline or uneven

washing machine and non

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

surface?

stability of a washing machine.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Then close the lid.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is the water faucet turned on?

Open and close the lid once and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is the water supply frozen or shut?

then press the START button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is the inlet net of the water intake valve choked with dust?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is the lid opened?

Close the lid.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

6348100701 (11-15)

14

28/10/08, 10:12

Page 14
Image 14
Toshiba AW-7480EM owner manual Before Calling the Serviceman, When Check Treatment