Toshiba B-852-TS12-QP owner manual A1.4 Ribbon

APPENDIX 1 SPECIFICATIONS

ENGLISH VERSION EO1-33028

A1.4 Ribbon

A1.4 Ribbon

Please make sure that the ribbon being used is approved by TOSHIBA TEC. The warranty does not apply to any problem caused by using non-approved ribbons.

For information regarding TOSHIBA TEC approved ribbon, please contact a sales representative.

Type	Spool type
Width	120 – 220 mm
	Recommended width is 120, 160 and 220 mm.
Length	300 m
Outside Diameter	φ72 mm (max.)

The table below shows the correlation between ribbon width and media width (backing paper is not included).

Ribbon width	Media width
120 mm	70 – 110 mm
160 mm	110 – 150 mm
220 mm	150 – 242 mm

NOTES:

1.To ensure print quality and print head life use only TOSHIBA TEC specified ribbons.

2.To avoid ribbon wrinkles use a ribbon that is wider than the media by 10 mm or more. However, too much difference in width between the two may cause wrinkles.

3.Be sure to use 220 mm-wide ribbon when using 210 to 242 mm wide media.

EA1- 5