Automatically returns to normal shutter if fixed H level (after approx. 1/6s)

TRIG IN not acceptable for

1V after mode chenge

TRIG IN

(Positive)

CCD Exposure

Exposure time

(E-shutter speed or

pulse width)

VIDEO OUT

VD,V-SYNC pause during standby

Definite

VD,V-SYNC output for 1V only

WEN OUT (Standard)

Normal shutter Random trigger shutter Normal shutter

￿Exposure time delay under RTS

When the RTS is active, both in FIX mode and PULSE W mode, there is a time delay of approximately 1.4 micro s until the start of exposure after the rising edge of TRIG signal (positive).

￿Exposure time under pulse width mode

Under RTS pulse mode, the exposure time is determined by the pulse width. More exactly, the actual time is the pulse width plus approximately 8.0 micro s.

TRIG IN

Pulse width

CCD

Exposure

Exposure delay time = Approximately 1.4 micro s

Exposure time = Pulse width + Approx. 8.0 micro s

(4-3) Restart / Reset

The restart / reset function is available with the ext.VD signal. You can get an arbitrary slower shutter speed than normal shutter and random trigger shutter.

Here are some notes;

*The shutter speed (exposure time) is determined by ext. VD signal interval. ** This function is enabled when the rear-panel shutter speed DIP SW is OFF.

*** Supply consecutive HD.

EXT VD IN

CCD Exposure

VIDEO OUT

The exposure time is determined by VD interval

WEN OUT (Standard)

WEN OUT

[Option]

4

D4133738B

Page 10
Image 10
Toshiba CS3950D specifications Supply consecutive HD, Ccd