Toshiba CS3950D specifications Shutter Normal

(3)Restart / Reset	Restart / reset available via ext. VD signal
	(Switching via rear panel DIP SW, Initial OFF)
	Notes : * The exposure-time (shutter-speed) is determined by ext.
	VD interval.

**Enabled when rear-panel DIP SW OFF.

***Provide Consecutive HD.

[Partial scan]
(1)Operation mode
No	Scan mode	Sync	Reset	E-shutter Normal	E-shutter RTS
1		Internal	Non-reset	Enabled [Option]	Enabled
2			V-reset	Disabled
	1/2 partial
3		Consecutive HD VD IN	Non-reset Enabled [Option]		Enabled
4		Consecutive HD (VD) IN	V-reset	Disabled
5		Internal	Non-reset	Enabled [Option]	Enabled
6			V-reset	Disabled
	1/4 partial
7		Consecutive HD VD IN	Non-reset Enabled [Option]		Enabled
8		Consecutive HD (VD) IN	V-reset	Disabled

Note: Items shown as [Option] in this document is not included in your purchase as standard components. Contact our dealer / distributor for details.

(2) Reset mode

As shown in (1) above, non-reset and V-reset is available.

([Option]: Doesn’t come as standard. Contact our dealer / distributor for details)

(a) non-reset (Electronic shutter enabled)

VD doesn’t get reset after video readout. The interval of VD signal is as follows.

Partial A

VIDEO OUT

Partial B

Partial C
	1/2 partial scan	1/4 partial scan
	796H	796H

VD Interval

*Note: Under normal shutter mode, when non-reset is selected on partial scan, electronic shutter is valid.

Please note that the exposure time is shortened than the setting value when the external VD is input at shorter than the above VD interval.

(b) V-reset (Electronic shutter disabled)

VD does get reset after video readout. Under internal sync, the interval of VD signal is as follows.

Partial A

Partial B

Partial C

Partial D

Partial E

VIDEO OUT

1/2 partial scan 1/4 partial scan

387H 193H

VD interval

Note: Items shown as [Option] in this document is not included in your purchase as standard components. Contact our dealer / distributor for details.

9

D4133738B