Toshiba CS8560D specifications Video OUT

(2) Reset mode

As shown in (1) above, non-reset and V-reset is available.

([Option]: Doesn’t come as standard. Contact our dealer / distributor for details)

(a) non-reset (Electronic shutter enabled)

VD doesn’t get reset after video readout. The interval of VD signal is as follows.

	1/2 partial scan	1/4 partial scan
1/60s non-interlace	525H	525H
1/120s interlace	262.5H	262.5H
Partial A		Partial B	Partial C

VIDEO OUT

VD Interval

*Note: Under normal shutter mode, when non-reset is selected on partial scan, electronic shutter is valid.

Please note that the exposure time is shortened than the setting value when the external VD is input at shorter than the above VD interval.

(b) V-reset (Electronic shutter disabled)

VD does get reset after video readout. Under internal sync, the interval of VD signal is as follows.

	1/2 partial scan	1/4 partial scan
1/60s non-interlace	262H	131H
1/120s interlace	131.5H	65.5H

Partial A

Partial B Partial C Partial D Partial E

VIDEO OUT

VD interval

(3)Partial signal [Option] Programmable mode input signal

(a) Input level	LOW level: From 0 through 0.5V
	HIGH level: From 4 through 5V
(b) Input impedance	High impedance (10kΩ)
(c) Polarity	Positive (Hi: High-speed transfer)

Note: Items shown as [Option] in this document is not included in your purchase as standard components. Contact our dealer / distributor for details.

27 D4130891A