Toshiba CS8560D specifications Under other shutter modes, Option

(5)Partial-scan mode selection (Camera rear-panel DIP SW) Switches partial-scan mode

Note: Sometimes phenomenon called as “whiteout” occurs at the top of the screen when there is strong incident light entering in the wide area of a CCD, however, this is not a malfunction. If this occurs, reduce the amount of incoming rays.

(5-1)1/2 Partial-scan (Rear-panel SW: #8-OFF, #9-ON) --- Screen center 1/2 readout

□1/60s Non-interlace

Under 1/60s non-interlace mode, only the center portion of 227H out of the total effective lines 494H (excluding BLK time) is read out. Available both under external / internal mode.

130H High-speed transfer

Normal-

227H speed transfer

137H High-speed transfer

	Normal-
227H	speed
	transfer

■Under normal shutter (Electronic shutter OFF)

Notes: * Under ext. sync, the ext. VD should be 1V = 262H.

** Under normal shutter, set the rear-panel DIP SW #6, #7 in OFF.

131 357 131 357 <V-reset>

VIDEO OUT

	21H	227H	14H
	V BLK	VIDEO output	High-
	(Include
		time	speed
	High-speed
			transfer
	transfer)
WEN OUT		262H	262H
(Standard)	3H		3H
WEN OUT
[Option]	3H		3H

3H

3H

■Under other shutter modes

131

VIDEO OUT

21H

V BLK

(Include

High-speed

transfer)

WEN OUT

(Standard) 3H

WEN OUT

[Option]

4H

357<Non-reset>

227H	14H	(263H)
VIDEO output	High-	*1
time	speed
	transfer

3H

*2

*1:Arbitrary under ext.sync

*2:See "7.TIMING CHART (4)WEN timing".

14 D4130891A