Toshiba CS8560D specifications Ext Vd Ext Hd

(5-3) Programmable partial [Option]

By designating the high-speed transfer portion with external PARTIAL signal input, the camera read out only the portion of CCD area necessary for your application. This is available under ext. sync.

EXT VD
EXT HD	1(H)
	10 Line	2(H)
PARTIAL PULSE
a(H)	n(H) Total line = n(H) x 10 line
[ *1 ]	Start	Finish

VIDEO OUT

High-speed trans. n(H)

BLK trans. 2(H) Normal-speed

1/60s non-interlace 1/120s Interlace

[*1] 1st field 2nd field

a(H) 6.0 12.0 11.5

(Conditions)

zThe starting point of external partial signal is [*1] from the falling edge of ext. VD.

zThe external partial signal is controlled at each ext. HD falling edge. Set the start / finish of the external partial signal in 1H increments.

zThe number of 1H high-speed transfer line is 10 lines. The actual lines are determined by the external partial signal “hi” period. (Minimum: 2H = 20 lines)

zSet video output time more than 30H. And high-speed transfer time (the external partial signal “hi” period) before video output time is is as follows;

from 2H through 22H under 1/60s non-interlace mode from 2H through 11H under 1/120s interlace mode

zAfter high-speed transfer, 2H is allocated to blank transfer period. Normal transfer starts at the next line.

zVIDEO OUT vertical blanking is;

V. blanking = [*1](H) + n(H) + BLK transfer [2(H)] – 1H

Example follows below.

(High-speed 2H = 20 lines (minimum), Normal-speed 70 lines + BLK 2H)

Note: Items shown as [Option] in this document is not included in your purchase as standard components. Contact our dealer / distributor for details.

20 D4130891A