Toshiba D-KR4SU DVD recorder operation, AV record quality, •To apply the recording mode, Mode

DVD recorder operation

AV record quality

DVD-RAM DVD-RW DVD-R

You can select from 5 recording modes prior to actual recording.

Actual selection applied becomes the default setting for the normal recording or programmed recording.

e.g.

AV record quality

	DVD	- - -		SP 4.6			D/M1
Custom setting
	Setting	Mode	Rate		Audio quality
	1	X P	9. 2			D / M1
	2	S P	4. 6			D / M1
	3	M P	3. 0			D / M1
	4	L P	2. 2			D / M1
	5	E P	1. 4			D / M1

Total Recording Time: approx. 122min.

(with 4.7 GB unused)

•To apply the recording mode

1)Press ADJUST to change the setting.

You can confirm the available recording time for the selected setting on the bottom screen.

2)Press SELECT/ENTER.

Note

•You can change the recording mode also by displaying Quick Menu during stop mode, then selecting “AV record quality”. Either of the above methods updates the setting of this recorder.

Picture record mode

DVD-RAM DVD-RW DVD-R

Adjusts problems with the brightness of video signals of TV broadcasts or other external input.

Press / buttons to select the source, and / buttons to select the mode.

(Only use this setting when you cannot adjust the brightness satisfactorily with the Custom picture setting in the Picture/Audio settings ( page 113) of this recorder.)

Important:

•This setting changes the video signal to record and the recorded signal is not returned to the original state even when this setting is changed after recording. When duplicating from VHS tape, if you can check the video recording state beforehand, we recommend first playing back for a while and checking the overall brightness tendency, then setting an appropriate mode.

Standard:

The brightness of signals received with this recorder and external input signals is adjusted automatically. This is normally the setting to use.

Mode 1:

This setting is used to record the signals darker when the screen is too bright.

Mode 2, 3, 4:

As the number rises, the signals are recorded brighter. Use these modes to adjust the brightness.

Input Black level

DVD-RAM DVD-RW DVD-R

You can adjust the black level of the input signal.

Standard:

Normal black level.

Enhanced:

Brighter black level than in “Standard” setting.

Introduction RecordingPlayback

Editing Function setup Others

117